Freestanding and slide-in stoves, gas and electric, 30 and 36 inches — the ones that sit in a slot between two runs of counter.
Tell us the appliance and what it is doing. We will come and look.
Service for 16 major and premium appliance brands
The fault list changes with the format. A built-in column and a counter-depth machine fail in different places, and the one that has to come out of the cabinetry needs the extra pair of hands.
30 and 36 inches, standing on their own feet
Clicking that will not stop, a flame burning yellow instead of blue, an oven that lights late. The ignition system is nearly always the answer.
Coil and smooth-top
An element heating unevenly, a surface switch stuck on high, a cavity that will not come up to temperature. Cheap parts, quick visits.
Flush between the counters
A slide-in has to come out to be worked on and go back without scarring the counter either side. That is a two-person job done slowly.
Glass surface, electric cavity
The surface and the oven are separate systems. A dead zone is the power board under the glass; a cold oven is the element or the sensor.
Two cavities in a freestanding body
One control board driving two cavities, so a fault in the small upper oven often shows up as odd behaviour in the main one.
The drawer under the cavity
A separate low-wattage element and its own thermostat, and the first thing to fail on a stove that is otherwise fine.
Every brand here builds stoves, and every card is about that machine. The parts we fit match the original specification.
Slide-in and freestanding across gas, electric and dual-fuel, with the widest parts availability in the premium group — which usually means a same-visit repair.
The most widely serviced stove in the city and the easiest to get parts for. Almost always worth repairing rather than replacing.
Shares most of its hardware with Whirlpool, which keeps both the diagnosis and the parts straightforward.
Freestanding gas and electric in volume. The faults repeat, which means we usually arrive with the part already on the van.
Slide-in induction and gas with a lot of electronics behind the fascia and good on-board diagnostics once you can read them.
Flex-duo cavities that split in two, which is a second door seal and a second set of hinges to go wrong.
800-series slide-ins built to sit flush with the counter, board-driven and well documented.
Slide-ins on a widely serviced platform — the professional look without the professional parts wait.
We repair stoves from Wolf, Viking, Thermador, Miele, Dacor, Fisher & Paykel and JennAir too — they are not the specialist end of the trade, and they are not priced like it.
Plenty of shops will turn up. These are the parts of the job that decide whether the repair actually holds.
Sub-Zero, Viking, Wolf and Thermador are built differently from mass-market machines, and they fail differently. These are the units our techs are on every day, so the fault gets recognized rather than hunted for.
Parts and labor are covered for up to twelve months depending on the repair, and the term is written on your invoice rather than left vague.
Parts that match the original specification. A cheaper substitute in a sealed system is how a one-visit repair becomes three.
The visit costs $99. Go ahead with the repair on that same visit and the fee comes off the bill, so the diagnosis is effectively free. Decide not to, and you have paid $99 for a straight answer and owe nothing further.
You see the price and approve it first. No work starts, and nothing is ordered, until you have said yes.
Most calls across the Valley get a technician out the same day, and anything leaking or unsafe goes to the front of the run.
BHGS #50900 for Major Appliance Repair, independently confirmed by Yelp. Fully insured, so a mistake in your kitchen is our problem and not yours.
Floors protected, the unit back on its rails, and the packaging gone with us. A built-in has to come out before most repairs can start.
From the first call to the final test, every step is built around your time and your kitchen.
Call or send the form. Brand, model if you have it, and what the appliance is actually doing — that is usually enough to know what to bring.
A technician finds the fault and explains it in plain terms, including the parts involved and what it will cost.
Written, flat, and agreed before any work begins. If you would rather not go ahead, that is fine — you pay the call-out and nothing more.
Most repairs finish on the first visit. The work and the parts are warrantied, and we check back that it held.
We cover 53 cities and neighborhoods, from the Conejo Valley to Long Beach.
We cover 53 cities and neighborhoods across Los Angeles and the Conejo Valley, from the Conejo Valley to Long Beach.
“This company is fantastic. Art worked tirelessly on my SubZero. We had multiple problems and he came out every time that I called him. They are reliable, honest, and quick. Thank you Art and Victor!”
“I am a property manager in LA County with multiple properties. MKH Appliance Repair is my go-to solution for all things appliance related. They have been helping me get repairs done quickly for the past 2-3 years. I cannot thank them enough for the quality service they provide! If you need your appliances fixed, call them!!…”
“… The Appliance Repairman arrived promptly and was incredibly professional and knowledgeable. He diagnosed the problem with my refrigerator quickly and explained the repair process clearly. The repair was done efficiently, and my appliance is now functioning perfectly. Their customer service was outstanding from start to finish.…”
The things people ask us most, answered plainly. If yours is not here, phone and ask.
(213) 523-3555Tell us the brand and what it is doing. Most repairs finish on the first visit, and you will know the price before any work starts.